Question
Width of cut in a disc plough can be increased
bySolution
The disc angle ranges from 40-45o to obtain the desired width of cut and the tilt angle ranges from 15-250 for penetration.
- Pipes K and L alone can fill a tank in 4 hours and 6 hours respectively. When both pipes along with pipe M, an outlet pipe, are opened together, 3/4 of the...
Pipe A and Pipe B together can fill the tank in 25 hours. The capacity of the pipe A is 20% of the capacity of the pipe B. How much time will pipe B alo...
Pipe ‘A’ can fill a 210-litre tank in 21 hours. If pipe ‘A’ is 25% more efficient than pipe ‘C’ whereas pipe ‘B’ is 50% more efficient t...
There was the leakage in the refined container. If 8 litre of refined is leaked out per day then it would have lasted for 20 days and if the leakage was...
An inlet pipe can fill a tank in 8 hours, whereas an outlet pipe can empty the same tank in 16 hours. Find the time taken by three such inlet pipes and ...
Pipe ‘A’ takes 40 minutes to fill a tank. Pipe ‘B’ takes 50 minutes to empty the same tank. If pipe ‘B’ is opened 21...
Two inlet pipes 'A' and 'B' can fill an empty tank in 25 minutes and 50 minutes, respectively. Another outlet pipe 'C' can empty the tank in 100 minutes...
Two inlet pipes 'A' and 'B' can fill an empty tank in 60 minutes and 90 minutes, respectively. Another outlet pipe 'C' can empty the tank in 180 minutes...
Pipe 'X' can fill a tank in 24 hours. Pipe 'Y' can fill the same tank in 36 hours. If pipe 'X' is started ___ hours after pipe 'Y...
Pipe 'A' takes 20 minutes to fill half of the tank. Pipe 'B' is twice as efficient as pipe 'A'. Find the percentage of the tank filled by both in 8 minu...
Relevant for Exams:
